Clean Room Lighting Equipment

modular construction lighting

Surface, Heavy-Duty

Uses

Suitable for use in contamination-controlled environments ISO5 (Class 100) and ISO6 (Class 1,000) applications, such as electronic assembly, pharmaceutical processing, semiconductor manufacturing, chemical labs, food-processing areas and the medical industry.

Construction

Surface models feature seam-welded housing. Completely sealed, one-piece housing is fabricated from 20-gauge cold-rolled steel.

Full door frame is one-piece, 18-gauge CRS featuring triple closed-cell, cross-linked neoprene gasketing between the door, lens and housing.

Optional four-piece inset door also available.

Full 2’x4′ door frame secured to housing by 10 stainless steel captive screws, while inset door features four screws.

Optional stainless steel and aluminum housings and door frames available.

Metal parts finished with electrostatically deposited, thermally set polyester powder paint after fabrication.

Installation

Meets requirements for hose-downs up to 200 psi.

Listings

UL Listed (standard). CSA Certified or NOM Certified. UL Listed for 25°C ambient and wet locations, covered-ceiling installations. Optional FDA, food-processing option available.


clean room

Standard teardrop

Uses

Suitable for use in ISO4 (Class 10) and ISO5 (Class 100) cleanroom applications. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables for suitable uses.

Construction

Die-formed 20-gauge cold-rolled steel or extruded aluminum channel. Stainless steel or formed aluminum housings available. Finish (standard) – white polyester powder paint; other finishes available

Optics

Diffuser is one-piece, extruded, white acrylic with internal linear prisms for optimum light control. Smooth external surface for undisturbed airflow. Clear available.

Installation

For surface mounting to 2″ T-bar. Suitable for individual or row mounting. End caps are availabler for row mounting but are not included; order as an accessory. End cap quatitities will vary by project due to row mounting configurations.

Listings

UL Listed to US and Canadian safety standards. See Options for 347V. Tested in compliance with the International Organization for Standardization (ISO) Worldwide Contamination Classification. 25°C ambient temperature and dry location.


modular construction clean word

Recessed, Heavy-Duty

Uses

Suitable for use in contamination-controlled environments ISO5 (Class 100) and ISO6 (Class 1,000) applications, such as electronic assembly, pharmaceutical processing, semiconductor manufacturing, chemical labs, food-processing areas and the medical industry.

Construction

Completely sealed, one-piece housing is fabricated from 20-gauge cold-rolled steel. Seams sealed with silicone caulk.

Full door frame is one-piece, 18-gauge CRS featuring triple closed-cell, cross-linked neoprene gasketing between the door, lens and housing. Optional four-piece inset door also available for grid mounted fixtures.

Full 2’x4′ door frame secured to housing by 10 stainless steel captive screws, inset door features four screws.

Optional stainless steel and aluminum housings and door frames available.

Metal parts finished with electrostatically deposited, thermally set polyester powder paint after fabrication.

Installation

Meets requirements for hosedowns up to 200 psi.

Suitable for use in 1″, 1-1/2″ and 2″ wide T-grids, or with overlapping flange and swing-out hangers for use in dry or plaster ceilings. Consult factory for other grid types.

Listings

UL Listed (standard). CSA Certified or NOM Certified. UL Listed for 25°C ambient and wet locations for covered-ceiling applications.


prefab buildings

Surface, Heavy-Duty

Uses

Suitable for use in contamination-controlled environments ISO7 (Class 10,000) and ISO8 (Class 100,000) applications.

Construction

Code-gauge steel housing is completely sealed with silicone caulk. Aluminum mitered-corner door frame features sealed cam latches and neoprene gasketing between door and housing.

Metal parts are finished after fabrication with electrostatically deposited, thermally set polyester paint.

Installation

Meets requirements for hosedowns up to 100 psi.

Suitable for use in 1″, 1-1/2″ and 2″ wide T-bars, or with overlapping flange and swing-out hangers for use in dry or plaster ceilings.

Listings

UL Listed (standard). CSA Certified or NOM Certified. UL Listed for 25°C ambient and wet locations, for covered-ceiling applications.