Clean Room HEPA Filters Construction Equipment

** Note: Listed below are common types of HEPA filters but we install other types as well.

Mac 10 Original Fan Filter Unit

HEPA Filter - Fan Filter Unit | Modular Clean Rooms
The Envirco® MAC 10® fan filter unit was the first (FFU) to combine low sound, low watts and a low profile. Measuring only 51 dBA, the MAC 10® Original Standard provides one of the lowest sound levels of any FFU in the industry. Performing at only 310 watts at 90 fpm, the unit uses less energy than traditional FFUs, while lowering total operating costs. The MAC 10® Original maintains a low profile, measuring less than 13″ (330 mm). Original comes standard with the filter integral with the unit housing, requiring the unit to be removed from the ceiling grid to replace the filter. The RSR unit has the filter sealed to the unit using the knife edge/gel seal construction, allowing the filter to be replaced from the room side. This unit has the added feature of allowing the motor and filter to be replaced from the room side.

Features

Low profile, low sound, low profile, and low operating costs.

Three-speed switch features low, medium, and high settings; standard on all 2 ft. x 4 ft. (600 mm x 1,210 mm) and 2 ft. x 3.5 ft. (600 mm x 1,057 mm) units.

Solid-state speed control standard on 2ft x 2ft. (600 mm x 600 mm) and 2 ft. x 3 ft. (600 mm x 905 mm) units.

Forward-inclined centrifugal-type fan.

High Efficiency Particulate Air (HEPA) UL 900 Filter: 99.99% efficient @ 0.3 micron.

Pre-filter snap-in allows for easy replacement and maintenance.

Walkable plenum (excluding pre-filter), rated to 250 lbs.

Mill finished aluminum exterior.

Tested to IEST recommended RPC standards.

UL listed (120V, 240V, 277V) with standard UL 900 filter.

 

Mac 10 LE-DC Fan Filter Unit (FFU)

HEPA Filter -  Fan Filter Unit | Prefab Buildings
The Envirco® LE-DC fan filter unit, uses a combination of DC motor technology with Envirco’s baffling system technology and backward inclined fan to make it the most energy-efficient available. This unique combination takes advantage of Envirco’s expertise in Fan Filter Units and the energy efficiency of DC motor technology. The electronically commutative (EC) motor with an internal micro-computer: provides the low energy power consumption of 95 Watts at 650 CFM and 90 FPM at 0 inches of static adding high performance and long motor life.

Features

Low watts, low profile, and low operating costs.

Three-speed switch features low, medium, and high settings; standard on all 2×4 ft. (600 x 1,210 mm) units.

Backward-inclined centrifugal-type fan. (Not available with SSSC.)

High efficiency particulate air (HEPA) UL 900 Filter: 99.99% efficient @ 0.3 micron.

Snap-in 20×20 pre-filter allows for easy replacement and maintenance.

Walkable plenum (excluding pre-filter), rated to 250 lbs.

Mill finished aluminum exterior.

Tested to IEST recommended RPC standards.

UL listed (120V, 240V, 277V) with standard UL 900 filter.

 

Ducted Ceiling Module

HEPA Filter - Fan Filter Unit | Modular Construction
The Ducted Ceiling Module is a terminal filter used in standard T-bar drop ceiling systems, used in cleanrooms with centralized air. It is lightweight and easy to install. Designed as a fully disposable unit, the Ducted Ceiling Module is inexpensive and easily replaceable.

Features

Anodized extruded aluminum frame with one piece aluminum top/inlet collar.

Dimple Pleat® filter pack for a lightweight, low profile design.

Available Sizes: (24×24) and (24×48).

Room side challenge port and adjustable damper.

White painted expanded metal face guard on downstream side to protect the media.

HEPA 99.99% at 0.30 microns.

Filter is tested to IEST recommended RPC standards.

HEPA Certification
Request A Quote